eBay been good to me lately... sweeeet

[timmiz_roxxxz]

so yeah eBay been good for me lately after lookin past ebays junk I found these now I got them.... can't wait to put them on to bad the instructions are in Japanese...I'll figuer it out doesn't seem hard at all...... and no I didn't pay no 700 $ for them ether

[EdwardJTurkowII]

nice

If you have the instructions, scan them up and send them to me, I'll translate them for you!

私はこれが異なった言語を表示することを考える! Oh涼しい、それは! 日本語は私の第2言語である: -)

[timmiz_roxxxz]

Googleの翻訳に便利です... I hope it translated right lol...

[SWARTZAUTOMAN]

PIMP!
i wouldn't pay $700 ether
ill get me a set one day

[SWARTZAUTOMAN]

do a DIY (with lots of pics) for us and show us how easy the install is, most of us don't speak or read Japanese ether, and let us know about the sound quality.

[EdwardJTurkowII]

It IS convenient to translate!

I'd like to see these in person just to see how they're built and what the parts are on it. I bet I could fabricate a pair for at least half the price. Unless the parts themselves cost a lot. The clear plexiglas would be the most expensive of that.

[timmiz_roxxxz]

lol.... I was thinkin the same thing befor I bought these.... jus get sum plexi glass, LEDs strips and put it all together... and try to make sumthing similar

[SWARTZAUTOMAN]

same here, but the real ones are pimp

[EdwardJTurkowII]

does anyone know what that power converter is on the bottom of these speakers?

i know the UV lights are running off it too but I was wondering if that was a specific power supply for this setup or if there was a product out there like that to buy

[SWARTZAUTOMAN]

i think its a 150 watt amp or some type of amp i might be wrong about the watt

[lowNsquare]

damn i soo want a pair of them never really new where to get them

[timmiz_roxxxz]

right now got no clue on power or anything I jus seen the deal and jumped on it.... I'll check latervor tomarrow when I'm not so lazy

[SWARTZAUTOMAN]

keep us posted

[EdwardJTurkowII]

Just from studying the pictures of the speakers on other sites I've figured this out so far.
The longest of either side of the plexi is 343 x 435mm
each has a 23mm soft dome tweeter
160mm woofer/driver
Normal music power outage is 45W, Maximum is 150W
4Ohm impedance and a 89dB/W(1M) sensitivity(which is basically PERFECTLY mad for our car)
Frequency response of 30~30,000Hz
and is powered by a DC12V

So far I've ordered the Plexiglas, which is half inch
And for the speakers I've got coming
PIONEER TS-C1653
6.5" 2-Way Rear Deck Mount Speaker with 150 Watts Maximum Power
50 Watts Nominal Power(45 more than the Carrozzeria's
2 Swivel Mount Separate 120 Watts Tweeters w/ splitters
40W Nominal Power
7/8 " Dome
Impedence 4 ohm(exact same)
Sensitivity 90 db/w(1dB higher)
Frequency Response 30-32,000Hz(Max 2KHz more)

The speakers are 1 package but each side L/R comes with its own amp/power supply kind of like the ones on the Carrozzeria's, but a little bigger.
As for lights I was just thinking 4" cathodes or maybe led strips. The ones on those speakers are UV, and everything's painted white/with special wire casings to make it glow, but I was thinking for my car I'd just put yellow lights on them to go with the solar yellow box.

Lastly I'll have to either customize 4 mounting brackets for each or just buy something but they're not too big. It's just S-shaped metal.

There's still some unknowns for powering up the lights and a couple of the pieces on the originals but I think I might have it down now.

When I get all of the materials in I'll start construction and do a DIY post and eventually a video for a sound test. So far everything's looking to come to about $150(depending on if I go cathode or led, and what style I do)

But that's a lot better than $780 with shipping or $1000 all together like I've seen so far on ebay!

[Peej]

How do those mount to the windows?